![]() ![]() If the AEBS or TC is downstream of another router or gateway device, configure that device for port mapping/forwarding to the AEBS or TC.If the 802.11n or 802.11ac AEBS or TC is connected directly to the broadband Internet modem or combination modem/router or gateway device, verify that the device is in bridge mode, i.e., if the device provides NAT & DHCP services, disable them.iOS/iPadOS: Access will require a third-party app, like FileBrowser.The user name can be anything you like the password should be the disk password for your base station. ![]() You should be prompted for your user name and password.Enter the DynDNS-provided Domain Name of the base station, followed by a colon and the Public port number that you chose from the setup steps above.From the Finder > Go > Connect to Server.Select the base station > Edit> Disks tab > Check both " Enable file sharing" & " Share disks over WAN" options are enabled.Select the base station > Edit > Internet tab > Internet Options.One DDNS-provider is DynDNS and will be assumed for the following steps. Acquire a DDNS account and dynamic global host name.Regardless of the provider, the setup instructions should be the same. Another option would be to use a different DDNS service provider, like Dynu. If you use DynDNS, you still will have two choices: 1) Use a DynDNS client on a computer running on your local network to provide the updates, or 2) Replace the AirPort base station with another manufacturer's product that has native DDNS support. NOTE: The DDNS-provider DynDNS, used in the setup example below, no longer supports AirPort base stations running firmware 7.6.1+ or AirPort Utility 6.1+. Using Finder, verify that you can access the AirPort Disk from the local network. ![]() The methods presented are not necessarily in any particular order. There are at least three potential methods to access a shared AirPort Disk over the Internet from a remote Mac or iOS/iPadOS device. How do you change a user password on a user account within Time Capsule without using Airport Utility when you know your current user account user & password but you don't know the device password of the Time Capsule.NOTE: For the purpose of clarification, an AirPort Disk can either be an internal HDD in a Time Capsule (TC) or an external SSD/HDD attached to the USB port of either a TC or an AirPort Extreme base station (AEBS). If I sign in with my assigned password, I can access to my Shared disk account without problems so it cannot be an invalid IP or server name because I can access, I just can't change the password. When I connect from finder to the Time Capsule a modal comes in to sign in and there's a button to change password.Ĭlicking on change password triggers a new modal to input old password, new password and verify.Īfter I click Change Password I always get an error like this: I've been trying to figure out how a regular user with no access to the Time Capsule main password would go in and update his own password. I used a default password so each user would then sign in via Finder and then change it to something else. ![]() To ensure a minimum of privacy, via Airport Utility->Disks I created One account per each user (Changed S ecured Shared Disks->With accounts). I installed a Time Capsule at my office to handle backups of all Macbooks (8). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |